•
•
Eutectics develops and markets a new generation of
phones, designed for home and office use. The Eutectics
Internet Power Phone™ line of products connect to the
USB port on your PC instead of the standard wall socket
and enable all the powerful benefits of IP Telephony in
a simple, convenient way. The IPP400 integrates
completely with a variety of Internet Telephony services
such as offered by ITSP’s, CLEC’s, SIP Service Providers,
Windows Messenger and Yahoo. If you need more
information or would like to evaluate alternative Internet
Power Phone models please visit our website at
www.eutecticsinc.com.
Step1. Verify Operating System Version:
IPP 400 Deskset device requires one of the following
Operating Systems:
Windows 98™ SE (Second Edition) or
Windows ME™ or Windows 2000™ or
Windows XP™
In case you need to verify the
Operating System and version go to the start button
and
choose settings\control
panel\system. If you use
•
•
•
•
•
•
•
Windows 98 please make sure it is the Second Edition.
Step 2. Plug In your Internet Power Phone:
Make sure you have one free USB port (see Figure 1)
Plug your IPP 400 Deskset in an available USB port
Place the Phone set on your desktop in a convenient
location.
Step 3. Installation & setup:
Your PC will now automatically start to install your Internet
Power Phone. In case you use Windows ME, 2000 or XP
all proper device drivers will load automatically.
If you use Windows XP please choose the ‘
Continue
Anyway
’ option when loading the IPP400 drivers. The
drivers have been fully tested for XP compatibility.
If you use Windows 98 SE, your PC will identify that
it needs three sets of drivers:
Simply click "Next" for each window that opens and
"Finish" in the end.
You may need to insert your original CDROM of
Windows 98 Second Edition or download the IPP400
drivers.
The IPP400 will act as your default sound device. Your
speakers may be set as the sound device for other
applications, while the IPP400 is used for Internet
Telephony applications. Please check with your
application provider for more information.
Step 4. Test the Installation Process:
Move your cursor over the "Volume" icon in the system
tray and click your right mouse button (see figure2).
Choose: "Adjust Audio Properties" (see figure 2).
Select the Audio tab (see figure 3).
Make sure that the "preferred device" drop down
windows for "Sound Playback" and "Sound Recording"
both are set to "USB Audio Device" or "Eutectics
IPP400" for Windows XP.
Make sure that the "Use only preferred devices" option
box on same screen is Checked (see figure 3). The
magnetic hook switch is activated when the phone is
placed on the deskset base.
Features:
3 Memory Dial Keys
Ringer Volume Control (Hi/Lo/Off)
Automatic Last Number REDIAL
ProgramMemory and FLASH keys
Store Number in Memory:
1. Lift Handset - Press the P/M button once.
2. Dial number - Press M1 - M3 to store.
3. Replace Handset
Dial Number in Memory:
1. Lift Handset - Press M1 - M3 to dial stored number.
FLASH:
1. Press the FLASH button to disconnect an active call
and get a new dialtone.
Congratulations!
You have successfully installed your IPP 400
Internet Power Phone.
NOTE: In order utilize the full phone capabilities of your IPP400
USB telephone you need to have an account with an Internet Telephony
service provider such as MCI, Vonage, MSN, Yahoo or an IP-
PBX such as Cisco Call Manager, 3Com NBX or Nortel or any
other provider of your choice.
F i g u r e 1 - USB
Figure 2 - Volume Icon Dialog
Figure 3 - Adjust Audio Properties Dialog
Internet Power Phone 400™
Installation Guide