Instruction Manual
DO 6
22
5 MEASUREMENT
The DO 6 meter is capable of taking measurements with automatic or manual
temperature compensation.
5.1
With Automatic Temperature Compensation (ATC)
For Automatic temperature compensation, make sure the phono jack of the
probe (see Figure 6 in Section 3.5) is securely inserted. The ATC annunciator
“A” will be blinking if the ATC probe is disconnected. Activate the “A.ATC” mode
in the set up menu, if necessary. See page 36.
%
A
Automatic Temperature
Compensation activated
Figure 13: Automatic Temperature Compensation
Summary of Contents for DO 6
Page 75: ......