9
3. Installing And Using 16-Port NWay Switch
3.1 Installing The 16-Port NWay Switch
The switch does not require software configuration. Users can
immediately use any of the features of this product simply by
attaching the cables and turning the power on.
3.1.1 Desktop Installation
Locate the switch on the desktop and place the switch on
a clean, flat desk or table close to a power outlet. Plug in
all network connections and the power cord, then the
system is ready.
When deciding where to put the switch, you must ensure:
It is accessible and cables can be connected easily
Cabling is away from:
＊
Sources of electrical noise such as radios,
transmitters and broadband amplifiers
＊
Power lines and fluorescent lighting fixtures.
Water or moisture can not enter the unit
Air flow around the unit and through the vents in the
side of the case is not restricted (company
recommend that you provide a minimum of 25 mm
clearance)
To prolong the operational life of your units:
Never stack units more than eight high if
freestanding.
Do not place objects on top of any unit or stack
Do not obstruct any vents at the sides of the case
