Enable Dynamic Mode Click the checkbox to enable Dynamic PPTP function.
IP Address
If you select the PPTP support on WAN interface, fill in
the IP address for it.
Subnet Mask
If you select the PPTP support on WAN interface, fill in
the subnet mask for it.
Server IP Address
Enter the IP address of the PPTP Server.
Server Domain Name
Input domain name to resolve DHCP server.
User Name
If you select the PPTP support on WAN interface, fill in
the user name and password to login the PPTP server.
Password
If you select the PPTP support on WAN interface, fill in
the user name and password to login the PPTP server.
Connection Type
Select the connection type from pull-down menu. There
are
Continuous
,
Connect on Demand
and
Manual
three
types to select.
Continuous
connection type means to setup the
connection through PPTP protocol whenever this
UGL2430-RTB is powered on.
Connect on Demand
connection type means to setup the
connection through PPTP protocol whenever you send
the data packets out through the WAN interface; there are
a watchdog implemented to close the PPTP connection
while there are no data sent out longer than the idle time
set.
Manual
connection type means to setup the connection
through the PPTP protocol by clicking the
Connect
button manually, and clicking the
Disconnect
button
manually.
Idle Time
If you select the
PPTP
and
Connect on Demand
connection type, fill in the idle time for auto-disconnect
function. Value can be between 1 and 1000 minutes.
MTU Size
Fill in the mtu size of MTU Size. The default value is
1460. Refer to 4.23 What is Maximum Transmission Unit
(MTU) Size?
Request MPPE
Encryption
Click the checkbox to enable request MPPE encryption.
Request MPPC
Click the checkbox to enable request MPPC
