2.7 Test Program
This test program verifies configuration of the
adapter and assists the isolation of any faults
in operation. Test procedure are optional, and
will only be useful in the unusual event that
there is a fault, such as an interrupt number
conflict among your computer’s add on cards,
If your installation provides normal operation,
you do not need these test procedures.
At your DOS prompt, type the following
command:
a:\rset8139.exe
<Enter>
The opening screen is displayed as following:
View Current Configuration
Set Up New Configuration
Run Diagnostics
Exit RSET8139
Choose
<Set Up New Configuration>
item
allows you to set up the Network Speed, 10 or
100M, and Transmission Mode, Full or Half
Duplex, and so on. Choose
<Run
Diagnostics>
item to run the adapter test
program.
Adapter test program includes:
<Run EEPROM Test>,
<Run Diagnostics on Board>,
<Run Diagnostics on Network>, and
<Run Power Management Test>.
The
<Power Management Test>
is available
for WOL adapter only.
9
