background image

23

22

EN

Thank you for choosing an EUROtronic Technology GmbH 

product. Our products represent outstanding design and product 

quality „Made in Germany”.  

Please consult this Quick Start Guide User Manual for all 

questions related the Spirit Z-Wave Plus radiator Thermostat. 

Please read this User Manual carefully before 

installing the Spirit Z-Wave Plus thermostat and store 

this manual for documentation.

If you wish to receive further technical Support or information 

about other EUROtronic products, please contact us via E-Mail 

or telephone.

Customer Service: 

E-Mail: [email protected]

Telephone:  +49 (0) 66 67 / 9 18 47-0 (Mo.-Fr. 8.00-16.30 Uhr)

Adress: 

EUROtronic Technology GmbH 

 

Südweg 1

 

36396 Steinau an der Straße

INTRODUCTION

TABLE OF CONTENTS

Description

see page

Scope of delivery

 24

Warning / Safety

25

Introduction Spirit Z-Wave Plus

26

Controls-/ Display elements

27

Inserting batteries

28

Including the device to your Z-Wave network

29

Installation at the radiator without Adapter

30

Installation at the radiator with Adapter

31

Manual operation

32 - 33

Adapters

34

Removing

35

Help and error messages

36 - 37

Legal Notice 

38 - 39

EN

Summary of Contents for Spirit Z-Wave Plus











Reviews: