Page 7
GENIUS BLE 100
6. INSTALLATION AND START-UP
F
ig
. 1
F
i
g. 2
1. Remove the battery cover by pulling it upwards at the notch (Fig. 1).
2. Now insert the batteries.
Pay attention to the correct polarity! Do not use rechargeable batteries.
3. Place the battery cover back on the GENIUS BLE 100 (Fig. 2) by pressing until it clicks.
The GENIUS BLE 100 is only in menu mode after you have inserted the batteries during initial commissioning and after
resetting to the factory settings. The menu item Assembly/Disassembly flashes.
- When the batteries are changed, this stage is skipped and the adaptation run is carried out automatically.
- The configuration is retained if the battery is changed later. Please note:
- The key lock is deactivated.
- The target temperature is set to 16°.
6.1 INSERTING/CHANGING BATTERIES
BATTERY:
If the batteries are weak, the battery LED
will flash continuously until the batteries are changed.
