2
1. Connect the longitudinal frame elements with the 8 corner connection elements to
make an octagon
2. Insert the round tubular feet into the receptacle of the corner connection elements.
3. Tighten the allen bolts on the corner connection elements.
4. Attach the springs using the suspension hooks.
5. In doing so, it must be ensured that the spring eyelet faces down.
6. Fasten the padding to the frame using the attached straps.
7. Connect the padding using the Velcro connections.
8. Attach the access ladder (optional).
9. Attach the safety rules to the trampoline frame.
10. This completes the assembly of the Octotramp.
3. Recommended maintenance for the Octotramp models
The trampoline must always be examined for possible damage before use. It must par-
ticularly be ensured that the frame pads, jumping bed, springs and frame parts do not
show any damage. Any damage must be rectified immediately. If there is any doubt
whether the unit is functional, always obtain expert advice (e.g. from the manufactu-
rer).
The equipment should be checked regularly for technically faultless condition.
The following must be checked regularly:
•
Floor protection
•
Frame pads
•
Jumping bed
•
Springs
•
Frame parts in general
