5
•
jumping bed
•
steel springs
•
frame parts in general
Before each use check the trampoline and replace any faulty or missing part.
Please ensure the following things:
•
no damages at the jumping bed,
•
faultless condition of suspension of jumping bed,
•
no cracks or other damages on the frame,
•
no damaged or overstretched springs,
•
springs are always hooked in with the eyelet pointing downwards,
•
frame pads must be mounted properly.
3.1 Maintenance and repair measures
•
Damaged floor protection has to be replaced.
•
Over-extended and tired springs have to be replaced.
The spring ears should point
downwards!
4. Parts list
Name
Pieces
Hot-dip galvanized steel springs (Art. No. E31104)
80
Hot-dip galvanized steel springs for fastening frame pads
8
Jumping bed 280x140 cm made of PVC-coated synthetics
1
Bent legs made of hot-dip galvanized round pipes/tubes 35x2,5 mm (80x90 cm)
4
Frame parts long side (277x8x14 cm) flat steel tube 65x35x2,5 cm, hot-dip galvanized 2
Frame parts short side (223x52x14 cm) flat steel tube 65x35x2,5 cm, hot-dip galva-
nized
2
Frame pads for long side
2
Frame pads for short side
2
Safety manual
1
Socket screws
8
Socket wrench
1
Fastening set for coverall frame pads consisting of 6 spring clips, 4 steel springs and
1 black belt
1
All spare parts available from Eurotramp upon request!
Eurotramp Trampoline - Kurt Hack GmbH
Zeller Straße 17/1
|
73235 Weilheim/Teck
Tel. +49 (0)7023 - 9495-0
|
Fax +49 (0)7023 - 9495-10
|
www.eurotramp.com
We are pleased to remain at your disposal to answer any questions:
