POWER SAVING
1. The default mode is
–Sd (power saving off). Short press DOWN to turn on power saving mode. It will show “onSd”.
Press DOWN again to turn off the power saving.
2. Under power saving mode, LED will turn off if no operation in 10 seconds.
3. LED will turn on when alarming.
SOUND CONTROL
Under power saving mode, clap or knock on the table/clock to make noise to turn on the LED display.
BUILT IN BATTERY
Built-in 1PC x CR2032 battery to keep the time running when power is off, but other functions cannot be used.
DISPOSAL
：
The packaging material is reusable. Dispose of the packaging in an environmentally friendly way by putting it in the
appropriate recyclable waste collection containers.
Dispose of the product and the batteries in view of the environment if you want to separate. The device and
the batteries must not be thrown in with domestic waste. Take them to a recycling center for used electrical
and electronic devices. For more information you can consult your local government. Remove batteries first.
Eurotops Versand GmbH
Elisabeth-Selbert-Straße 3
40764 Langenfeld, Germany
If technical support is needed, please call ...
in Germany
0180 . 530 63 63* or
in Austria
01 . 230 60 43 12 or
in Switzerland
044 . 28 36 125 or
in the Netherlands
026 . 37 36 333 or
in France
0892 . 700 470** or
* 14 Cents/minute via German landline, max. 42 cents/minute via mobile phone network
**34 Cents/minute via French landline
A possible return of products should be addressed to the return address stated on your invoice.
The manual only reflects the technical conditions available under printing. Any changes in technology and equipment are
reserved.
© 01.05.2017
