GB
No. NAME
DESCRIPTION
1/6
Temp-Up Button
Increase the set temperature (from 15
℃
to 32
℃
)
2
Digital Display
Shows the set temperature or timer value
3/7
Power Button
Turn on/off the heater
4/8
Temp-Down Button
Decrease the set temperature
5/9
Timer Button
Set timer (1-12 hours)
OPERATING INSTRUCTIONS
5.
To use the heater on desktop, install the heater onto the plastic stand.
Connect the extension cord’s socket with the heater’s plug, and plug in the extension cord into the mains.
1. To Power on the unit, first switch the master power switch (D) on
the unit to the ON position.
2.
Turn the heater on or off by pressing the Power button on the control
panel or remote controller. Once the power is off, heating elements will
stop working first. The fan will continue working for up to 60 seconds to
dispense residual heat inside the heater. This is a normal function.
3. Set the temperature by pressing the arrows on the control panel or
remote controller.
You can set the temperature on the heater anywhere between 15°C
and 32°C. Once you have chosen the desired temperature, the heater
will remain on until the room temperature increases to the temperature
on the digital display. The heater will cycle on and off to maintain the
desired room temperature.
4. To set the timer power off, start the unit and press the Timer button
on the control panel or remote controller.
Note:
The timer-power-off function can only be set when the heater is
in power-on mode.
Press the Timer button repeatedly to change the number value
between a range of 0 to 12 hours (in 1-hour intervals).
