TESTING MOTION SENSOR OPERATION
1. Set the alarm to CHIME mode.
2. After the initial chime, wait 15 seconds and then wave your hand in front of the sensor. If the chime sounds immediately, the sensor is
working correctly.
3. To turn the unit off, set to ALARM mode.
BATTERIES
Do not allow the batteries to corrode and leak as this may cause permanent damage to the product. Take care to insert the batteries with the
correct polarity as shown inside the battery compartments. Do not mix new and old batteries or different types of batteries. Do not use
rechargeable batteries. At the end of their useful life, the batteries should be disposed of via a suitable recycling centre. Do net dispose of with
your normal household waste. DO NOT BURN.
WARNING:
RISK OF PERSONAL INJURY PROLONGED EXPOSURE TO
THE ALARM SIREN MAY CAUSE PERMANENT HEARING LOSS
FOR INDOOR USE ONLY
DO NOT USE IN WET LOCATIONS
