2
A.
LAMP ASSEMBLY
B.
INSTALLATION/ REPLACEMENT OF BULB
Instructions before installing or replacing the bulb:
Spare parts
- The cable must be disconnected from the socket.
- Place the lamp on a flat, stable and non-slippery surface.
- If the lamp was lit before, allow the lamp and the bulb to cool for at
least 10 minutes before any operation.
Characteristics
:
Lamp: 230V 50Hz
2 LED bulbs (12W max each, E27 - non
included) to be installed under the
lampshade.
1 LED bulb (9W, E14 – not included) to be
installed in the lamp body. See the
procedure below for installation.
Unscrew the small ball under the
lampbody. Remove the cover and take
out gently the bottom so as to see the
lampholder. Do not pull on the wires !
Unscrew the old bulb.
Screw the new one.
Replace the bottom into the lampbody,
put the cover and screw the small ball.
1
2
English
3
4
