GB
Touch Sensor Lighter – 44082
Warning:
1. Do not use it when charging.
2. Please don’t over charge the battery.
3. Do not submerge it into any liquid.
4. Do not expose it under direct sunlight for long period of time.
5. Do not touch the electric wire with your finger.
6. Clean the ash and dust in time.
7. It is not a toy. Keep it away from children.
ATTENTION!!!
The returns will be impossible if products were damaged because of incorrect use.
DISPOSAL
：
The packaging material is reusable. Dispose of the packaging in an environmentally friendly way by putting it in the
appropriate recyclable waste collection containers.
Dispose of the product and the batteries in view of the environment if you want to separate. The device and
the batteries must not be thrown in with domestic waste. Take them to a recycling center for used electrical
and electronic devices. For more information you can consult your local government. Remove batteries first.
Eurotops Versand GmbH
Elisabeth-Selbert-Straße 3
40764 Langenfeld, Germany
If technical support is needed, please call ...
in Germany
0180 . 530 63 63* orin Austria
01 . 230 60 43 12 orin Switzerland
044 . 28 36 125 orin the Netherlands
0892 . 700 470** orIn Norway * 14 Cents/minute via German landline, max. 42 cents/minute via mobile phone network
**34 Cents/minute via French landline
A possible return of products should be addressed to the return address stated on your invoice. © 1/07/2019
Features:
- No flame, no gases, no fuels, wind proof
- New technology electric Arc lighter
- Touch sensor to switch on
- Built in lithium battery Lithium 3.7V 220mAh, charged by USB cable (USB
cable is included)
- About 1-1.5 hour charging time can lights up for about 20 times
- All-weather used, works in -10 to +50 degree Celsius
- Material: zinc alloy
Operation:
1. Open the lid.
2. Touch the sensor area to switch on the lighter. Close the lid to turn it off or
the lighter will turn off automatically after about 7 seconds.
Charge:
1. When the LED at the bottom is flashing, it means the battery is
low. Please recharge the lighter.
2. Connect the USB cable with the lighter and DC 5V USB
adapter. (USB cable is under the inlay)
3. When charging, the LED light is blue. If fully charged, LED will
turn off.
ARC
Sensor area
