2) In real time display, press and hold "E" button to enter alarm mode and display alarm
time. Release the button to exit alarm mode and return to real time mode.
3) Press and hold "D" button to enter date mode, the date displays. Release the button to
exit date mode and return to real time mode.
b) CHRONOGRAPH FUNCTIONS
In chronograph mode
(Refer to section a. “MODE”)
:
Press button "D" button:
1) Once to start the chronograph;
2) A second time to stop the chronograph;
3) A third time to continue timing.
4) To reset the stopwatch to zero, press "D" button to stop the chronograph and then press "E".
NOTE:
•
When you switch to other mode, the chronograph continues timing in the background if
you don’t stop it. The chronograph display range is limited to 23hours, 59 minutes and 59
seconds. When it reaches this limit, it restarts from zero.
•
The stopwatch counts in 0.01 seconds at the beginning, and it counts in seconds after 30
minutes.
SPLIT TIME
1)
When it’s timing, press "E" button to take a split time.
Note: When taking a split time, the chronograph continues timing in the background.
2)
Press “E” to resume timing. Press “E” to take a second split time.
3) Repeat step 2 to take any additional split times as desired.
4) Press "D" button to exit split time and stop timing.
5) Then press "E" button to display the final count and press "E" button again to reset it to zero.
NOTE: In chronograph mode, the icon of day of week (b) will display the status of
chronograph when operating this mode. See table below.
Stop the chronograph
Meaning of the coloured
triangle
While timing
= Flashing
Split count
= Fixed
Exit split count
