7
3.5 BLUETOOTH MODE
Press
【
】
repeatedly to select Bluetooth mode. Turn on your device and activate bluetooth in
its setting. Find “
DABC1
” and pair it with the DAB radio. Play your bluetooth device as you
normally do. Music will be played from the unit.
You could also have a phone conversation from the earphones plugged in the DAB radio. Once
you receive a call from your smartphone, press
【
OK
】
(central key) to reply. Use the
microphone to speak. Press
【
OK
】
to hang up.
Notes
:
*
Make sure the distance between your bluetooth device and the unit is within 10
meters.
*
Avoid having other bluetooth devices nearby interfering the signal and connection.
3.6 WHITE NOISE MODE
This mode allows you to fall asleep to the soothing hum of a specific natural sound selected
among 6 ones: forest, wave, ocean, rain, zen meditation and thunderstom.
Press
【
OK
】
to enter this mode. Wait until “Set sleep time” displays. Press
【
◀
or
▶
】
to
select the time: 15, 30 or 45mn. Press
【
OK
】
to confirm. Press
【
◀
or
▶
】
to select the
natural sound. The countdown displays
.
4.
TROUBLESHOOTING
Problems
Solutions
The battery icon is not on when
charging..
Check the charging wire or power adapter.
Automatic shutdown or automatic
restart
Battery is low. Please charge it in time.
Poor DAB or FM receiving signal
Adjust the earphone cable to get better reception, or move
to a better signal place
No sound or the radio signal cannot
be received.
Replace a new earphone, Earphone cable as the radio
antenna
.
5.
WARNINGS
1.
Keep away from sources of heat, direct sunlight, humidity, water or other liquids.
2.
Do not operate it under high temperature.
3.
Do not immerse in water.
4.
Do not subject it to strong impacts and do not throw it.
5.
Do not drop, short-circuit, modify, disassemble or puncture it.
6.
It is not a toy. Keep out of reach of children.
7.
In case of abnormalities (bulge, heat, etc.) during charging, disconnect USB connector, stop
using it and take it to a qualified technician.
8.
Do not try to repair your radio. All the repairs must be made by a qualified technician.
9.
Disconnect it from USB connector after completion charge.
