P474
/
TP-3405
RECHARGEABLE FLASHLIGHT
INSTRUCTION MANUAL
PRODUCT DESCRIPTION
9. LED
10. Charger socket
11. Button to turn ON/ OFF the LED and to get the
different lighting modes
12. Battery compartment
TECHNICAL CHARACTERISTICS
•
Power supply: 2 x 18650 lithium-ion rechargeable batteries
•
Capacity: 2000 mAh each
•
Voltage :3.7V each
•
Technical specifications (adapter)
• 220-240V~ 50HZ,
• 4.2V
+/- 0.5V, 500mA
•
LED: 1 LED CREE XPE, 3W, 200 lumens.
BATTERY INSTALLATION
7. Remove the battery compartment cover
(4). Then remove the battery pack
inside the battery compartment. Install
the batteries in the battery pack paying
attention to the (+ and -) polarities
indicated inside the battery pack.
8. Insert the battery pack into the battery
compartment.
Note: For the correct direction of insertion of the battery pack. Please refer to
the arrows indicated on it (see the figure below).
9. Close the cover.
CHARGING THE BATTERY
Duration of charging for the first 3 charges:
12 Hours
Duration of the following charges:
6
~
9 Hours
1
2
3
Plug
the
charger
into
the
charger socket (2).
Plug the charger plug into
the wall socket.
When the flashlight is
charging, the red LED on
the charger is on. It turns
green when the flashlight
is fully charged.
