S. 13
Setting the daily alarms:
Press and hold down “
MEM
” button more than 2 seconds until Alarm 1 Time hour display of the Alarm 1 time starts to
flash. Use the “
+
” and “
-
” buttons to set the required hour.
Press “
MEM
” button to confirm your setting, The Minute display of the Alarm 1 time starts to flash. Use the “
+
” and “
-
”
buttons to set the required minute.
Press “
MEM
” button to confirm your setting, The hour display of the Alarm 2 time starts to flash. Use the “
+
” and “
-
”
buttons to set the required hour.
Press “
MEM
” button to confirm your setting, The Minute display of the Alarm 2 time starts to flash. Use the “
+
” and “
-
”
buttons to set the required minute.
Press “
MEM
” button to confirm your setting and to end the setting procedure.
F.Y.I.:
After 20 seconds without pressing any button the clock switches automatically from setting mode to Normal clock
mode.
The alarm for opening and closing
The alarm 1 or alarm 2 shift switch is pushed in the “
ON
” position, LCD display the “ ” or “ ”icon, the alarm 1 or
alarm 2 function is open
Product back of the alarm shift switch is pushed in the “
OFF
” position, the “ ” or “ ”icon disappears, the alarm 1 or
alarm 2 function is close
F.Y.I.:
The alarm will sound for 2 minutes if you do not deactivate it by pressing any button. In this case the alarm will be
repeated automatically after 24 hours.
Rising alarm sound (crescendo, duration: 2 minutes) changes the volume 4 times whilst the alarm signal is heard.
Switching off the alarm signal
Press any button except the “
” button to stop the alarm signal. It is not necessary to reactivate the alarm. It
switches itself automatically to the alarm time which has already been set.
Snooze function:
Touch the "
" field or press the “
” button the alarm signal sounds to get to SNOOZE mode. The alarm
signal sounds again after approx. 5 minutes.