100 MM GRAPHICS RECORDER: USER GUIDE
HA027271
Issue 12 Mar 04
User Guide
Page 92
4.7.4 Message category
One or more messages (
), can be directed to the display (where it appears in a pop-up window), to both
groups or to a specified group. Messages must be contiguous - e.g. messages 2, 3 and 4 may be sent, but messages 1,
3 and 4 cannot be sent without message 2.
Figure 4.7.4 Message job menu layout
4.7.5 Maths Category
If the Maths option is fitted (section 3 of the Options Manual), the following jobs become available
Reset
Sets the selected maths channel value to zero.
Disable
Stops historical functions such as Fvalue, Stopwatch and Rolling Average from accumulating further
values. When the function is subsequently re-enabled, the function re-starts from its pre-disabled value.
'Disable' has no effect on other functions.
Switch to B
Causes the relevant maths channel to copy source B instead of its normal source A - see section 3.1.4 of
the Options manual for further details.
Trigger
Used to initiate a 'Sample and hold' function - see section 3.1.4 of the Options manual for further details.
Job Number
Send Message(s) to
Category
Group
First Message
1) group 1
1
Message
Specified Group
Select 'Display', 'All groups', or 'Specified Group'
Message 1
Last Message
Message 12
Select Group (if 'Specified Group' selected above)
Select first message of message list
Select final message of message list
On
Active
Select Active or Inactive
Figure 4.7.5 Maths job menu layout
Job Number
Action
Category
Math
On
Math 1
1
Math
Reset
Active
Select 'Reset', 'Disable'
'Switch to B' or 'Trigger'
Select Required Maths channel
Select 'Active', 'Inactive',
or 'Acknowledgement'
