5001/5002 – 8001/8002 Installation Instructions and Owner’s Manual
30
Ed. 06/2006
•
6-7
(Sat and Sun)
F. When all setting operations have been carried out, check and ensure that the different programs
do not contrast many times one with the others in order to avoid undesired operations. You can
check on the display the different settings (programmes) by simply pressing button
many times.
G. Move selector B to RUN position. The display will show the current day and time.
WARNING: all the programs set will be activated ONLY the day after the setting has been carried out.
During operation, the ON status of the timer is shown on the display by a light on the right end. When the
light does not appear, it means that the timer is in OFF status.
DELETING OF THE SINGLE PROGRAM
To delete the single program proceed as follows:
DELETING OF ALL PRE–SET PROGRAMS
To cancel all the pre–set programs press the key “R” for at least 2 seconds. All the pre–set programs will
be cancelled.
SETTING OF SKIP FUNCTION (SKIP THE ACTUAL PROGRAM)
To skip the actual program proceed as follows:
A. Put the right selector in ”RUN” position.
B. Press
key to SKIP the actual program. The next program will be
activated when required. SKIP function is shown on display by the
symbol of a crossed arrow (see SKIP symbol in Figure 16 on page
27).
C. The SKIP command can be stopped in any moment, by pressing again
the
key. The pre–set program will restart and SKIP symbol will
disappear from the display.
SKIP FUNCTION PROCEDURE DURING OPERATION
A. Move the right selector to the position
. Press the
and choose the
programme to be cancelled.
B. Press simultaneously key
and key
(SKIP) for least 2 sec. and
selected program will be cancelled.
C. Indication that program is cancelled is continued blinking of
0:00
.
A. SKIP function can be activated only in “RUN” mode.
B. SKIP function starts immediately after the pressing of the key, and
disappears when next program starts.
C. SKIP function can be stopped manually by pressing the SKIP key. In
this case the pre–set program will be activated.
1 2 3 4 5 6 7
0:00
2
1
1 2 3 4 5 6 7
15:16
1 ☼
X
1 2 3 4 5 6 7
15:16
