ETLUW4G03
Rev. 002
•
Turn on the main supply switch of the target ETL0W474G amplifier holding the “SELECT” button
placed on the front panel of the ETL0W474G amplifier module. This operation is needed to enable
second level menu of the amplifier module in order to set the requested amplifier parameters.
•
Push “SELECT” button until the “E-Link Node Addr
E-Link Node Addr
E-Link Node Addr
E-Link Node Addr” menu title appears. Enter this menu and set the
amplifier E-Link address by means of the push buttons “
+
+
+
+
” and “
----
“ according to the actual number
of the target amplifier (A1, A2 or other). Store the set value.
•
Push “SELECT” button until the “Local/Rem EnbMod
Local/Rem EnbMod
Local/Rem EnbMod
Local/Rem EnbMod” menu title appears. Enter this menu and check
that this parameter is set to “E-Link
E-Link
E-Link
E-Link”.
•
Switch off the amplifier module and switch on it again holding the “SELECT” button placed on the
front panel of the ETL0W474G amplifier module in order to make effective the E-Link setting.
•
Once the ETL0W474G amplifier module is switched on, push “SELECT” button until the “Channel
Channel
Channel
Channel
Frequency
Frequency
Frequency
Frequency” menu title appears. Enter this menu and check that the transmission frequency value is
the actual frequency of the transmitter unit.
•
Push “SELECT” button until the “MLC Nominal Val
MLC Nominal Val
MLC Nominal Val
MLC Nominal Val” menu title appears. Enter this menu and set the
correct value for the MLC attenuator by means of the push buttons “
+
+
+
+
” and “
----
“, in other to balance
the R.F. output power of the current module respect to the other amplifier modules of the transmitter
unit.
•
All the other ETL0W474G amplifier module parameters are factory set.
Refer also to “ ETL0W474G R.F. Power Amplifier Operating and Technical Manual” for Amplifier
Refer also to “ ETL0W474G R.F. Power Amplifier Operating and Technical Manual” for Amplifier
Refer also to “ ETL0W474G R.F. Power Amplifier Operating and Technical Manual” for Amplifier
Refer also to “ ETL0W474G R.F. Power Amplifier Operating and Technical Manual” for Amplifier
command explanation.
command explanation.
command explanation.
command explanation.
Page 22
CMANUW4G03
May 2013
Summary of Contents for ETLUW4G03
