Eurotech Vector, User Manual

Page: 37 / 45

System Specifications
37 110124-7000A
System Specifications
Processor
The following table specifies the Intel Atom Z5xxP/PT processor performance. For details about the
processor, see Core Processor , page 13 .
Parameter (note 2)
Min Typ. Max Units
Processor operating frequency (commercial) 1.1 1.6 GHz
Processor operating frequency (industrial)
1.33 GHz
Front side bus clock
400 533 MHz
Front side bus width 64 bit
Notes:
2. The VEC7000 Development Kit operates at 1.6 GHz, commercial temperature.
Power
Power Supply
The Vector accepts the main power input on J10 , page 30 . For details about the power supply
architecture, see Power Supply Architecture , page 22 .
Symbol
Parameter Min Typ. Max Units
Input Voltage
VIN Supply voltage 7 12 25 V
Output Voltage
V3.3S Normal operating power 3.135 3.3 3.465 V
BTN_ONOFF#
V
IH
High-level input voltage 2.5 5 V
V
IL
Low-level input voltage 1.0 V
R
PU
Pull-up resistance (note 3)
10 kΩ
V
PU
5 V
Notes:
3. BTN_ONOFF# includes a pull-up resistor to 5V “always on”.
Power Consumption
The following table lists estimated power consumption for the Vector.
Symbol
Parameter Min Typ. Max Units
P
Run
Run mode power 7 W
Electrical
This section provides electrical specifications for the Vector.
Embedded Controller
The embedded controller provides two A/D inputs on header J23 , page 34 . For descriptions of these
signals, see A/D Inputs , page 20 and I
2
C Bus , page 17 .
Symbol
Parameter Min Typ. Max Units
A/D Input
V
IN
Analog input voltage 5 V
A/D sample resolution 10 bit