Eurotech ISIS XL-1.1-M512-F2G-GPS-I User Manual Download | Manualshive

Page: 29 / 60

background image

Hardware specification

Issue E

29

Power requirements

The ISIS operates from +5V (+/-5%) power input. All other supply rails are generated on-
board.

A +12V supply connection is provided through J9, however the ISIS does not use this.
The +12V and –12V rails are routed to PC/104-Plus and PC/104 connectors and can be
used by other devices or modules that are stacked onto the ISIS module. -5V supply
connection is also provided at the power input connector (

J9 - Auxiliary power connector

and is only routed to the PC/104 connector for use by PC/104 add-on modules.

An external coin cell battery input is available through an 18-way header (

Multifunction and VGA connector

). An optional on-board SuperCap is provided. Jumper

JP3 is used to connect an on-board SuperCap (see page

for details).

Power consumption

The power consumption of the ISIS is 7–8W (average per typical application).

The following table shows some power consumption measurements taken on the ISIS
board.

Total board power

Hardware

OS/Activity

Atom
1.6GHz

Atom
1.1GHz

ISIS board + PS/2 key + USB mouse +
Ethernet

XPe/ Idle

7.1W

6.6W

ISIS board + PS/2 key + USB mouse

XPe/BurnIn

8.7W

8.0W

ISIS board + PS/2 key + USB mouse

XPe/ Video
playing

8.7W 8.0W

Board + PS/2 key + USB mouse + USB
test + Eth + GPS

XPe/ Video
playing

10.4W 9.0W

ISIS board + PS/2 key + USB mouse +
Ethernet

XPe + Internet Video
playing

7.8W 7.0W

The details in the table above were recorded when Windows XP Embedded was
running from on-board PATA Flash and VGA display was used at 1024x768
resolution. PassMark

®

BurnIn test software was used in some of the

measurements.

«
...
27
28
29
30
31
...
»

Summary of Contents for ISIS XL-1.1-M512-F2G-GPS-I





























































Reviews:

No comments

Related manuals for ISIS XL-1.1-M512-F2G-GPS-I

Brand: Gigabyte Pages: 58

cpuModules CME34BT

Brand: rtd Pages: 110

Brand: Gigabyte Pages: 31

Brand: JETWAY Pages: 48

MT9J003I12STCVH-GEVB

Brand: ON Semiconductor Pages: 5

Brand: ASROCK Pages: 154

Z690M DS3H DDR4

Brand: Gigabyte Pages: 36

Brand: JETWAY Pages: 48

Brand: TransCore Pages: 40

WAFER-BW-N4-R10

Brand: IEI Technology Pages: 136

MPG Z390 GAMING PLUS

Brand: MSI Pages: 76

Brand: unicore Pages: 29

Brand: unicore Pages: 28

BOXD945GCLL - Socket 775 MicroATX Motherboard

Brand: Intel Pages: 90

Brand: Dell Pages: 27

Brand: Quantum Research Group Pages: 15

Brand: OLIMEX Pages: 24

Brand: OLIMEX Pages: 31

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands