Eurotech GEMINI Page 6 User Manual Download

Page: 6 / 56

GEMINI user manual

Issue D

Features

The features included in the GEMINI are described below:

Processor

•

Intel Core 2 Duo / Core Duo / Core Solo / Celeron M 4xx Processor (Merom/Yonah)
at 533 / 667MHz FSB.

Chipset

•

Intel 945GME Northbridge and ICH7-M Southbridge.

BIOS

•

Phoenix-Award v6.00PG 4Mb PnP flash BIOS.

System memory

•

Two DDR2 533/667MHz SDRAM up to 3GB (Non-ECC, unbuffered memory is
supported only).

Video

•

Intel 945GME GMCH (Graphic Memory Controller Hub) integrated GMA (Graphic
Media Accelerator) 950 Technology.

•

Up to 224MB shared with system memory.

•

VGA, DVI, LVDS and SD/HDTV outputs.

Integrated I/O

•

Winbond W83627THG LPC Super I/O.

Audio

•

Intel ICH7-M integrated with Realtek ALC655 5.1 Ch AC97 Codec.

Enhanced IDE

•

Onboard 44-pin IDE (supports DOM).

Floppy port

•

Supports two floppy drives 360kB, 720kB, 1.2MB, 2.88MB.

Parallel port

•

Standard, Enhanced and Extended Parallel Port mode supported (SPP/EPP/ECP).

Serial ports

•

Three RS-232 and one RS-232/422/485/IrDA serial ports.

Summary of Contents for GEMINI

























































Search results

Summary of Contents for GEMINI

Reviews:

Related manuals for GEMINI

Brands by name

Popular brands

Eurotech GEMINI, User Manual

Search results

Summary of Contents for GEMINI

Reviews:

Related manuals for GEMINI

Brands by name

Popular brands