GEMINI 1U ICE - user manual
22
ETH_GEMINI_1U_ICE_USM
To remove the PCI module, follow these steps:
1
Remove any cables attached to installed PCI expansion cards.
2
Unscrew the card support bracket to free the back of the PCI boards.
3
Unplug the flexible riser connection from the GEMINI SBC.
Take care to pull out the PCI card edge rather than the flexible cable.
4
Unscrew the PCI module from the dual fan bracket and slide it back to clear the lugs on the base,
and lift out.
To fit a PCI card:
1
Remove the blanking plate.
2
Plug the card into the riser.
3
Tighten the retaining screw.
To install the PCI module back into the enclosure, reverse the procedure outlined on the previous
page.
