background image

 

16

 

2. Touching the keep warm control   

       

,the zone indicator show “      “   

 
 
 
 
 
 

Cancel the keep warm function

 

1. a

Touching the keep warm control “        ”, then the cooking zone will revert to 

its original setting.   

b: Touching the slider control, then the cooking zone will revert to the level 
you select. 
 
 
 
                                             

OR   

 
     
 
 

 
 

FLEXIBLE AREA                                                                   

• This area can be used as a single zone or as two different zones, accordingly to 

the cooking needs anytime.

 

• Flexible area is made of two independent inductors that can be controlled 

separately. When working as a single zone, the part that is not covered by 
cookware is automatically switched off after one minute.

 

• Important

Make sure to place the cookwares centered on the single 

cooking zone. In case of big pot,oval,rectangular and elongated pans make sure 
to place the pans centered on the cooking zone covering both cross. 
 
Examples of good pot placement and bad pot placement.   
 
 

Summary of Contents for ED-IFZ 604
































Reviews: