DynaPCN 10-xx Rev. 1-0
How to set up the Wide-Gate parameters
9 / 12
6.
Cycle the power on all the DynaPCN devices
.
Cycle the power on all the devices and wait for the devices to boot.
When the boot is completed all the devices are ready for “Wide-Gate” counting operations
7.
Set the configuration parameters
.
Connect the Host PC to the Master DynaPCN with WinClient, and set the configuration
parameters (In/Out direction, door threshold, light intensity, etc.). The Master DynaPCN will
redirect the settings to the slave devices.
