Introduction
3
An0066 Adaptor Reference Guide
Introduction
Manual Conventions
The following conventions are used throughout this manual.
The “Mode” of the register:
Symbol / Text Definition
RW
Readable and Writable register
RO
Read only register
W
Meaning of the register when written
R
Meaning of the register when read
Hexadecimal numbering:
Hexadecimal numbers are indicated with an “h” suffix (for example: 11Ch)
Symbols and Text used in Pin-out tables:
Symbol / Text Definition
◄
Input
►
Output
◄►
Bi-Directional
▬
Passive
Module
specific
Dependent on module installed
NC
Not Connected
Reserved
Use reserved to Eurotech, must remain unconnected
#
Active low signal
Warnings and Important Notices:
Within this manual you will find the following tables, please ensure that you read and understand these as
they are intended to highlight potential risks or precautions that should be taken.
Warnings:
Information to alert you to potential hazards:
Potential personal injury or damage to a system, device or program.
Information notes:
Indicates important features or instructions that should be observed
