Euroscreen SI-H 200 Installation And Maintenance Manual Download Page 3

Page: 3 / 39

RELEASE

ER2017_06_

This document is property of Euroscreen Srl.

Any distribution, reproduction, copying or publication of this document is prohibited.

Installation and maintanance manual

Projector lift

Mod. SI-H 200

1.1

PROJECTOR LIFT DESCRIPTION

1.0

GENERAL INFORMATION

This installation manual contains the description of “projector lift” as it is

manufactured by the manufacturer. This manual contains information about

installation, use and maintenance of the lift.

It also contains the information about the technical features and safe use of the

product.

The installation manual is composed from:

1.0

General information

2.0

Projector lift description

3.0

Safety and residual risks

4.0

Installation

5.0

Out of order

6.0

Check register

1.2

MANUFACTURER’S RIGHTS

Copyrights of this installation manual are exclusively of:

EUROSCREEN SRL

Via Stiria 45/16

33100 Udine - Italy

Tel. +39 0432 522755

Fax +39 0432 524000

[email protected]

www.screenint.com

1.3

CONTENTS AND MAP OF THIS MANUAL

The projector lift SI-H 200 is a motorized lift for videoprojectors.

Therefore it can be included in the definition of machinery following the Directive

2006/42/CE and modifications.

The present installation manual, the conformity certification and the technical

labels on the lift are conform to this directive.

Summary of Contents for SI-H 200








































Search results

Summary of Contents for SI-H 200

Reviews:

Related manuals for SI-H 200

Brands by name

Popular brands

Euroscreen SI-H 200, Installation And Maintenance Manual

Search results

Summary of Contents for SI-H 200

Reviews:

Related manuals for SI-H 200

Brands by name

Popular brands