This document is property of Euroscreen Srl.
Any distribution, reproduction, copying or publication of this document is prohibited.
Installation and maintenance manual
Motorized screen GIOTTO
Take out the roller tube taking care not to damage the cloth. Lay the roller tube with
cloth on a smooth and clean surface.
After laying the tube, disconnect the power connector from the motor.
Press towards the center of the tabs and, keeping them pressed, extract the
connector.
IMPORTANT: the roller tube with the projection surface has to be stored with
extreme CAUTION wrapping it in a clean plastic envelope and placed inside the
box paying attention that the cloth does not touch anything inside it, because it
could cause permanent marks on the cloth and therefore it will be PERMANENTLY
DAMAGED.
In order to mount the roller tube with the projection surface again, make the same
operations above described backwards.