202005-434-ENG
User manual - Mixpro 100
P11
4. USE OF THE MACHINE (continued)
4.2. STARTING UP
1.
Once the machine is plugged in, the display (J) shows AU (emergency stop). Turn the red button (AU)
to deactivate it.
2.
The display (J) shows OFF, push the button ON/OFF (1) to switch on the machine.
3.
The display (J) corresponds to the mixing speed from 0 to 100%, the display (K) shows the water
dosage in litres.
4.
Verify on the bag of the product to be mixed the water quantity and the necessary mixing time.
5.
Using the /- (8) and (9), set the water quantity to the inferior value given by the product
manufacturer.
6.
Press the button DOSAGE (6). The water starts to run into the tank.
7.
Using the /- (4) and (5), set the mixing speed to 80% and activate the mixing by pressing
on the button MIXING (2).
8.
Once the desired water quantity is in the tank (after the automatic stoppage of the water dosing),
break the bag of powder and empty it.
9. Mix the product for the time indicated by the product manufacturer.
10.
If the product is too dry, use the +WATER button to add some water. The display (K) increments the
value of the injected water quantity.
11.
If you had to add some water, correct the initially set quantity with help of the /- (8) and (9).
12. Press the EMPTYING button (3) and open the trapdoor (B).
13. Once the product has been emptied, close the trapdoor (B).
14.
Press the button DOSAGE (6) to once again pour water into the tank, then press the button MIXING (2).
15.
Once the automatic water dosing has stopped, break the bag of powder and empty it.
16. Mix the product for the amount of time indicated by the product manufacturer.
17. Repeat from step 12 as frequently as necessary.
4.3. ERROR CODES
The different error codes show up on the display (J).
CODES
DEFINITION
TO DO
No display.
Plug the machine into the power supply, assure the power supply is
230 V, verify the fuse in the electric box.
Emergency stop is
on.
Unlock the emergency stop button (AU).
Machine is in the
stop mode.
Switch the machine on by pressing on the button (1).
Default control
engine.
Set the machine to OFF for one minute and then switch it back on.
Default security
sensor.
Verify that the security grid is closed.
If the problem persists or if in doubt on the good running of the machine, do not try to repair
it by yourself or to dismantle it.
Contact an authorized After-Sale Service or our hotline : +33 4 42 29 08 96.
