26
Timer mode.
The appliance must be in standby mode; pilot ignited. The Timer setting allows you to set 2 burner
Temp
times and 2 burner
Temp
times every 24 hrs.
For
Temp
to operate as a thermostat, TEMP must be set at 4°C or higher.
If the
Temp
setting is decreased to - -, the motor will turn the valve to the standby position in the moon
times and await the next burner
Temp
cycle.
Setting the Temperature.
Select either the
Temp
MODE or the
Temp
MODE by briefly pressing the
SET
button.
Hold the
SET
button until the TEMP display flashes.
Set the desired temperature with
SMALL FLAME
or
LARGE FLAME
.
Press
OFF
to complete the program.
Setting the Timer.
Select Timer mode by briefly pressing the
SET
button.
Press and hold the
SET
button until the P1
is displayed, and the time flashes. Set the hour by pressing
LARGE FLAME
and set the minutes by pressing
SMALL FLAME
.
Briefly press
SET
button for the next burner cycle time.
Once all 4 times are set, press
OFF
to complete the programming.
Appendix A
Summary of Contents for Gas Stones Vent Free
Page 27: ...27 NOTES ...