SNOWING CHRISTMAS STAGE "SNOWMEN FAMILY"
9
Attach the clips inside on the frame ( fig. 1). Connect the hose
to the fan unit and then attach it to the clips from bottom to top
( fig. 2).
Performance check
• Connect the cable of the LED light chain inside the frame to
the yellow RCA jack at the fan unit.
• Connect the cable of the power unit to the power input at the
back of the base and the power unit to a power outlet (230 V,
50 Hz~).
• Fill the bottom of the frame with a small amount of
snowflakes for a short performance check. Please make sure
that there are no foreign objects in the frame that could block
the circulation of the snowflakes.
• Switch on the device with the operating mode selector at the
cable remote control and check if snowflakes come trickling
down from the hose, the light chain lights and if the music is
playing. If not, please check the assembly and al connections
until all functions work properly.
Stage design
• Mount the figures and the street lamp as shown: Screw the
holders to the bearing plate and put the figures on the
corresponding holders. Screw the lamppost to its holder. Put
both upper street lamp parts on the post and screw the
electric contacts on each side to the post. Mount the
Christmas wreath to the street lamp.
• Clip the bearing plate to the poles on each side of the frame.
Assembly is now completed. We hope you will enjoy this
product.
