Every information is subject to change without prior notice. 20.12.2010 ©
LED SNOWMAN
www.europalms.de
LED Snowman
The snowman with LED lighting serves for impressive
decorative illumination. Power supply is via the enclosed power
unit.
Safety Instructions
•
Maintenance and service operations are only to be carried
out by authorized dealers. Damage caused by manual
modifications on this device is not subject to warranty.
•
If the product is used for other purposes than originally
intended, if it is not correctly connected, damage may result
and the guarantee becomes void.
•
To avoid danger do not operate the product when it no
longer functions or when it is visibly damaged.
•
This product is only allowed to be operated with the voltage
given on the technical label and was designed for indoor use
only. The product falls under protection class 3, the power
unit under protection class 2.
•
Avoid excessive humidity and heat. The recommended
temperature range lies between -15° C and +45° C.
•
The F-symbol means: This device can be installed on normal
inflammable surfaces.
•
Always disconnect from the mains, when the product is not in
use or before cleaning it. Use a soft lint-free and moistened
cloth for cleaning. Never use alcohol or solvents!
•
Use the unit only with the supplied power unit.
Setting into Operation
1.
Set up the supporting stand and put the snowman figure
over it.
2.
Connect the cable of the power unit to the power input at
the device and the power unit to a power outlet (230 V,
50 Hz~).
3.
Adjust the desired operating mode with the controller.
Technical Specifications
Power supply:...................... 230 V AC, 50 Hz ~ via included
............................................. power unit 24 V DC, 200 mA
Power consumption: ........... 7 W
Number of LEDs: ................. 100
Height: ................................. 130 cm
Weight: ................................ 2.5 kg
