00047100.DOC, Version 1.0
11/11
Repeat this procedure to set alarm function
a2
.
a1 --
or
a2 --
means the alarm function is off;
a1 on
or
a2 on
means the alarm function is on.
The alarm sound is “BiBi BiBi, BiBi BiBi ” for 30 seconds.
After setting the time and/or the alarm function(s), press the “SET” again to exit the time setting.
While setting, if no operation is ordered for over 15 seconds, the setting state will be exited automatically, but
the last confirmed setting is still valid.
Note:
If the power supply is interrupted, the LED Clock shuts down, but the CPU (central processing unit) can
operate automatically. Thus it is unnecessary to reset when the power is on.
Adjustment of LED brightness:
When the LED Clock is running normally, press the “DOWN” button and the brightness is reduced by half.
Press it again and the brightness returns to normal.
CLEANING AND MAINTENANCE
Disconnect from mains before starting maintenance operation!
DANGER TO LIFE!
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply (via AC 9 V power-unit included in the delivery): 230 V AC, 50 Hz ~
Power consumption:
max.10 W
Maximum ambient temperature
T
a
:
45° C
Maximum housing temperature
T
B
(steady state):
60° C
Min. distance from flammable surfaces:
0.5 m
Min. distance to lighted object:
0.1 m
Number of LEDs:
143
Dimensions (LxHxW):
303 x 303 x 50 mm
Weight:
1.5 kg
Please note: Every information is subject to change without prior notice. 09.06.2009 ©
