Every information is subject to change without prior notice. 25.11.2010 ©
LED SNOWBALLS
www.europalms.de
LED Snowballs
The LED snowballs provide an impressive decorative
illumination. Power supply is via the enclosed power unit.
Safety Instructions
•
Maintenance and service operations are only to be carried
out by authorized dealers. Damage caused by manual
modifications on this device is not subject to warranty.
•
If the product is used for other purposes than originally
intended, if it is not correctly connected, damage may result
and the guarantee becomes void.
•
To avoid danger do not operate the product when it no
longer functions or when it is visibly damaged.
•
This product is only allowed to be operated with the voltage
given on the technical label and was designed for indoor use
only. The product falls under protection class 3, the power
unit under protection class 2.
•
Avoid excessive humidity and heat. The recommended
temperature range lies between -15° C and +45° C.
•
The F-symbol means: This device can be installed on normal
inflammable surfaces.
•
Always disconnect from the mains, when the product is not in
use or before cleaning it. Use a soft lint-free and moistened
cloth for cleaning. Never use alcohol or solvents!
Setting into Operation
1. Use the hangers to hang up the LED Snowballs. CAUTION!
Do not hang up the LED Snowballs by the power cable.
2.
Connect the plug of the power cable to the power unit and
plug the power unit into an outlet (230 V, 50 Hz~). The
LEDs light up, chaser effect:
Technical Specifications
Power supply:...................... 230 V AC, 50 Hz ~ via included
............................................. power unit 6 V DC, 150 mA
Power consumption: ........... 4 W
LEDs per Snowball:............. 36 (Ø 8 cm, 83501233 - 83501240)
............................................. 76 (Ø 15 cm, 8350124 - 83501248)
Total weight: ........................ 400 g (single)
............................................. 600 g
(5-piece set)
