00052850.DOC, Version 1.1
11/12
The durability of the installation depends very much on the material used at the installation area (building
material) such as wood, concrete, gas concrete, brick etc. This is why the fixing material must be chosen to
suit the wall material. Always ask a specialist for the correct plug/screw combination indicating the maximum
load and the building material.
Do only use appropriate screws and make sure that the screws are properly connected with the ground.
Mounting via hinged metal brackets and self-adjusting clamp
Install the device at the desired installation spot using the self-adjusting-clamp. The snap ring is ideal for
installing the device at objects with a diameter of 45–50 mm. When installed this way, a secondary
attachment must be effected via the metal brackets.
Operation via the optional power-unit
Connect the connection cable of the power-unit with the IN-socket of the device. Plug the power unit into
your outlet.
With the POWER-switch, you can switch the device on and off.
Make sure that the installation material is sufficiently dimensioned when installing the device.
Please refer to the instructions under Operating Determinations.
DANGER OF FIRE!
When installing the device, make sure there is no highly-inflammable
material (decoration articles, etc.) within a distance of min. 0.5 m.
Inserting/Replacing the batteries
Please refer to the explanations under Operating Determinations.
Open the battery covers on the bottom and remove them.
If replacing the batteries, remove the old batteries from the battery compartments. Only replace complete
battery-sets.
Caution!
Danger of explosion when battery is replaced improperly.
Only replace by the same type or similar types recommended by the manufacturer.
Remove empty battery in accordance with the instructions of the manufacturer.
Insert the batteries and make sure that the poles are correct. Replace the battery covers and close them.
In order to have a long battery life, you should only use alcaline batteries.
With the POWER-switch, you can switch the device on and off.
If the device is not used, switch it off via the POWER-switch. If the device will not be used for a longer period
of time, remove the batteries in order to avoid battery leakage.
BATTERY DISPOSAL NOTICE
Please dispose of old and used batteries properly.
Batteries are hazardous waste and should not be disposed of with regular domestic waste!
Please take old and used batteries to a collection center near you.
