EuropAce ETW 7800T, Instruction Manual, Page: 12 / 40

5.Preset selector
6.Water recycle to save water
8.Wash over
7.Press Start/Pause button,start washing machine
-10-
Select automatic process or edit process by yourself
Press Preset button continously, the indicating window show the needs time for washing (hr) .
(Example: if the preset time is 3 hours, press the Preset button till the window shows 3)
Please close wash lid completely.(otherwise machine will give alarm)
During the process of counting down to preset time, all buttons except power switch and
After pressing Start/Pause button,the washing machine starts to work.
When machine is under Preset function, Start/Pause button cannot be pressed.
If it is needed to change Program,Water level,process,please press Start/Pause button to pause the
washing machine and reset the model.After setting,the washing machine will start according to
new setting.
Stand by
Start
Pause
Unless user set the water recycle function, the machine will not carry out that function. If need that
The water recycle function only applys to the combination of “wash,rinse,spin”, “soak, wash,rinse,spin”
or “rinse,spin”, the function will be skipped over by other combinations.
function, press DIY until the indicator of water recycle lights on, then press Adjust until it shows “y”.
When it is on,machine will not drain at last wash. It will alarm to remind the user to keep
water untill the DIY button is pressed.
During keeping water,pressing DIY button is available to stop or start draining.
Do not open the lid during the operation, especially in spinning.
Unplug the power cord.
Maintenance as shown page 14 at "maintenance".
Preset button cannot be pressed.
The washing machine works as program you have set and shows the left time as you preset.
The Buzzer will alarm after program finish, and it will power on of automatically.