EuropAce ETW 7100V, Manual

Page: 16 / 37

Malfunction phenomenon
Start the washing machine from
Rinse Process, the washing
machine does not input the water.
The wash process changes
from Spin to Rinse.
The control button is useless to touch.
spin delay.
The washing machine will start from the spin process
in order to spin out the water and detergent from the
clothes, then input the water (if there is water in the tub
it will drain out the water first).
When the clothes are not even or are on a single side
of the tub, the washing machine will input the water and
make the clothes balance and even.
If want to change the program after the washing machine
started, please touch the Start/Pause button to reset the
to reset the program.
Trouble Shooting
Reason
Before maintenance
Problem
Checklist
Does not work
Is electricity present?
Is the tap opened?
Is the plug loose, or fuse is broken?
Turn on the power or start button?
Fail to fill water
Is the tap opened?
Is the drain hose frozen?
Is the water supply cut?
Is the water inlet valve blocked?
-14-
Body Maintenance
Clean the lint filter
Note:
Clean the surface of the washing machine with a soft
cloth regularly.
After washing starched or bleached laundry, the inner
tub must be clear ,or deposit will appear.
The washing machine will delay 15 to 60 seconds to
enter spin process after drain.
1. Pull upward to remove
the filter assembly.
2. Take the filter from
the filter cover.
3. Clean and rinse
it thoroughly.
4. Reinstall the filter.