Safety Instructions
注意事项
1. Before c
onnecting t
o power, please ensure the local voltag
e fit t
o the appliance and the
socket must be grounded and installed as required.
在接通电源之前，请确认当地电压与产品工作电压相符，电源插座必须接地极，并按要求安装。
2. Operat
e the appliance on a fla
t, ven
tila
ted, dry and heat-proof place.
使用时应将产品放置于水平、通风、干燥的地方。
3. Before use, please do make sure the hea
ting pla
te and the bottom of the cooking pot/ grill
are clean and ensure the cooking pot or grill well connect with the hea
ting pla
te.
使用前必须清除发热盘表面和铝锅底部的杂物，使发热盘与铝锅良好接触。
4. Before turn on the appliance, add water to the c
ooking pot fir
st. Never turn on the appliance
with an empty pot for dry burning as this may result in serious damage to the appliance.
产品工作时
，铝锅内先加水，后通电，请勿通电干烧，否则容易烧坏产品。
5. During use, the temperature is very high on the surface of the product and vapor is
exhausted from the vented hole. Please do not approach or touch the surface in
case of get
ting burn
t.
使用过程中，产品表面温度较高，排气孔有蒸汽排出，请勿靠近或触摸，以免烫伤。
6. The cooking pot/grill and hea
ting base r
emains hot a
ft
er use when the hotpot or grill
removed. Please do not approach or touch the hea
ting base t
o avoid get
ting burn
t.
使用完毕，铝锅/煎盘，发热盘温度仍较高，请勿靠近或触摸，以免烫伤。
3
For Grill
煎盘使用方法
1. Place the grill onto the hea
ting and sligh
tly adjust it t
o fit with the heating pla
te.
将煎盘放于热源座上，确保煎盘与发热盘表面接合。
2. To avoid the poor cont
act, fir
st dry the water stain on the bott
om of the pan filled with
soup or water, then put it on the hot plate.
将调节杆滑至“关”的位置，然后将电源线一端插入底座品字插内，另一端插头插入电源插座，
电源指示灯亮。
3. Switch the knob to the “
OFF” position and insert the plug in
to the socket.
将调节杆滑至“高”的位置（最高工作温度位置），此时加热指示灯亮，表示正在加热。
4. Add food into the grill when the grill is hot.
待煎盘热后，再加入煎烤的食物。
N.B. During the grill process, please pay atten
tion the c
olor change of the food and turn the
food regularly to prevent burn or rare food.
（注：煎烤过程，请注意食物的变化并且需要翻动食物，以免烤焦或烤不熟等现象）
5. Aft
er using, move the lever t
o the OFF position and t
ake off the plug from the socket.
使用完毕，将调节杆滑至“关”的位置，然后将电源线插头拔下。
