EP0 or EP1 Defect of the controller. Contact your dealer or Euromex When the display does not function, check wether the main switch is in the position 1. If it is, check the fuse.
Page 1: ...of the controller Z and fasten the connector 2 Connect the plug to the mains supply W 3 Set the main switch on the front panel to position 1 All digits of both displays A and B will light up as a tes...
Page 2: ...et by SET keep this button G pressed and change the temperature By means of pressing either button D or E For safety the maximum temperature which can be set is limited to 50 C 6 Set the switch at the...
Page 3: ...EP0 or EP1 Defect of the controller Contact your dealer or Euromex When the display does not function check wether the main switch is in the position 1 If it is check the fuse...
Page 4: ...EUROMEX Microscopen B V HOLLAND www euromex com...
