Euromatic DF9-SZ Instruction Manual Download Page 3

3

After Sales Support

 (AU) 1300 886 649  (NZ) 0800 836 761  |       [email protected]

Important Safety Instructions

READ CAREFULLY AND KEEP FOR FUTURE REFERENCE 

Read this manual thoroughly before first use, even if you are familiar with 
this type of product. The safety precautions enclosed herein reduce the risk 
of fire, electric shock and injury when correctly adhered to. Make sure you 
understand all instructions and warnings. Keep the manual in a safe place for 
future reference, along with any warranty information, your purchase receipt 
and carton. If you sell or transfer ownership of this product, pass on these 
instructions to the new owner. 

Always follow basic safety precautions and accident prevention measures 
when using an electrical appliance, including the following: 

Electrical safety and cord handling

•     Voltage: 

Make sure your outlet voltage and circuit frequency correspond to 

the voltage stated on the rating label. If this is not the case, do not use the 
fan.

•     Water

: To protect against fire and electric shock, do not immerse the cord, 

plug or the fan in water or other liquid, or expose the electrical connections 
to water. Ensure your hands are dry before handling the plug or switching on 
the fan. Do not use the fan outdoors or on wet surfaces. Protect it from liquid 
spills. 

•     Damage

: Check the power cord regularly for visible damage. If the cord 

is damaged, do not use the fan. A damaged cord must be replaced by 
the manufacturer, its authorised service centres or appropriately qualified 
personnel in order to avoid any hazards.

   WARNING!

 

Do not pick up or operate the fan if the power cord, plug 

or housing is damaged, or after it malfunctions or has been dropped or 
damaged in any manner. In case of damage, contact

 

our after sales support 

centre.

•   Protect the power cord: 

 

- Do not operate the fan with the cord coiled up; always fully unwind.

 

- Do not twist or kink the cord or let it touch heated surfaces.

 

- Do not put any stress on the cord where it connects to the product.

 

- Never carry or pull the fan by the cord.

 

- Arrange the cord away from any traffic area so no one will trip over it.

 

- Do not run the cord under carpeting or cover it with rugs or runners.

•    

WARNING!

 No extension cord, no speed control device: 

Do not use 

this fan with an extension cord or plug adaptor. To reduce the risk of fire or 
electric shock, do not use this fan with any solid-state speed control device.

Summary of Contents for DF9-SZ













Reviews: