Euromate 482178 Original Instructions Manual Download Page 22

Page: 22 / 88

– Press the

[

]

button, the unit would start to heat

up, press once time for low-level heating, the dis-
play would show

[

]

; press twice times for mid-

level heating, the display would show

[

]

; press

third times for high-level heating, the display
would show

[

]

[

]

; press fourth times for anit-

frost, the display would show

[

]

– Press the

[

]

timer button once, the display

would show

[00]

, and the

[

]

timer icon would

light up. If there is no operation, it would return to
the temperature display interface, and the

[

]

timer icon would go out, indicating that there is no
timer. To set the timer, press

[

▲

]

up button

and

[

▼

]

down button to select 0–24 hours timing.

When the timer is set, the

[

]

timer icon would

lights up.

– Press the

[°C]

temperature button once, the

default temperature 35 °C would be displayed
and flash. Press

[

▲

]

up button and

[

▼

]

down but-

ton to select the desired temperature. The tem-
perature can be adjusted from 0–50 °C. After
selecting the desired temperature, it would flash 5
times and return to the ambient temperature inter-
face.

Turbo function

– Press the

[ ]

button, the

[ ]

light would be on,

the fan would operate. Press the

[ ]

button

again, the

[ ]

light would be off, Turbo function is

turned off.

Safety equipment

This heater has two protection devices:

•

Thermal link: it would automatically disconnect
the power to the heater at the overheating tem-
perature. After cooling down, it would reset itself If
it happens, please check if there are any abnor-
malities causing overheat.

•

Thermal fuse: it would permanently disconnect
the heater in case of overheating. (Cannot be
reset).

Cleaning

– Switch off the device and let it cool off completely.
– Pull out the plug.
– Wipe the device with a slightly damp cloth.

Faults and remedial measures

When something isn’t working…

Malfunctions are often caused by minor faults. You
can easily remedy most of these yourself. Please
consult the following table before contacting the ven-
dor. You will save yourself a lot of trouble and possibly
money too.

If you can’t fix the fault yourself, contact your nearest
vendor. Please be aware that any improper repairs
will also invalidate the warranty and additional costs
may be incurred.

Disposal

Disposal of the appliance

A crossed-out wheelie bin icon means: Bat-
teries and rechargeable batteries, electrical
or electronic devices must not be disposed of
with household waste. They may contain
substances that are harmful to the environ-
ment and human health.

Consumers must dispose of waste electrical devices,
spent portable batteries and rechargeable batteries
separately from household waste at an official collec-
tion point to ensure that these items are processed
correctly. Information on returning these items is
available from the seller. Sellers are required to
accept these items free of charge.
Batteries and rechargeable batteries, which
are not permanently installed in waste elec-
trical devices, must be removed prior to dis-
posal and must be disposed of separately.
Lithium batteries and battery packs in all systems
must only be retuned to a collection point when dis-

Note:

The heating icon

[ ]

will only light up

when the ambient temperature is lower than
the set temperature.

Note:

In anti-frost mode, the heater will

operate when the ambient temperature is
below 5 °C and it will turn off itself when the
ambient temperature is 7 °C or above.

Note:

The default temperature is 35 °C

Note:

The heater would heat up during use.