Euromaid TL10KG Owner'S Manual Download Page 7

When the programme has finished

Programme selection

1 Install the washing 
   machine 

3  Add the detergent

7 Connect the power

6 Turn on the water tap

8 Select the desired 
   programme

5  Fix the drain pipe

4 Close the lid

9 Press the 
    [start/pause] key

11

When the machine stops, the buzzer will buzz continuously for 6 times and 
the power will be automatically cut off.
Turn off the water tap.
Pull out the power plug for safety.

1

Press the [POWER] button.

3

Press the [start/pause] key.

Select the programme, then select  the water level or other attached functions.

2 Load the laundry

12

! Close the lid before star the machine, otherwise, it will stop automatically 
   during spin process and alarm.
! The machine will not work when the filled water does not reach the defined lever.
! After turn on the [Power],  if the [Start / Pause ] button is not pressed, 
  the power will be  automatically cut off after 10 minutes.

NOTICE

 Quick start

press

 

the

 

Wash Progress

 

button

 

to choose

 

the

 

proper

 

washing

 

progress

Note: “    ”  on ,“ ”   off 

SO AK

Wash Progress

Wash

 Progress

 indicator

The

 

washing

 

progress

Long
Soak

Medium

Soak

Light

Soak

Agitating

Rinse

Spin

Spin

Spin

Spin

Spin

Spin

Rinse

Rinse

Rinse

Rinse

Agitating

Agitating

Agitating

Light

Soak

Light

Soak

Medium

Soak

Summary of Contents for TL10KG











Reviews: