Euromaid EMFS60SOINDSS User Manual Download Page 13

EN - 13

2.3 Safety Chain

The appliance can be prevented from falling 

over by securing the supplied safety chain 

to the rear of the cooker.

Use a wall plug to fasten the hook (1) to the 

kitchen wall and connect the safety chain 

(3) to the hook with the help of the locking 

mechanism.

1

2

3

4

5

6

1-

 Hook

2-

 Locking mechanism

3-

 Safety chain (mounted to appliance)

4-

 Tightly fix chain to cooker rear

5-

 Rear of cooker

6-

 Kitchen wall

The safety chain should be as short as 

practically possible to avoid the cooker 

tilting forward.

2.4 Adjusting the feet

Your product stands on four adjustable 

feet. For safe operation, it is important that 

your appliance is correctly balanced. Make 

sure the appliance is level prior to cooking. 

To increase the height of the appliance, 

turn the feet anti-clockwise. To decrease 

the height of the appliance, turn the feet 

clockwise.

It is possible to raise the height of the 

appliance up to 30 mm by adjusting the 

feet. The appliance is heavy and we 

recommend that a minimum of 2 people lift 

it. Never drag the appliance.

Summary of Contents for EMFS60SOINDSS





























Reviews: