2
1
/ EN
Washing Machine / User’s Manual
• Anti-Crease
This function makes the garments crease less when they are being washed. Rotational movements are
decreased and spin cycle is limited to prevent creasing. In addition, washing is done with a higher water level.
• Anti-
This function is selected when the spin selection button is pressed and held for 3 seconds and the programme
follow-up light for the relevant step turns on. When the function is selected, the drum rotates for up to 8 hours
for preventing the laundry from creasing at the end of the programme. You can cancel the programme and take
your laundry out at any time during the 8-hour duration. Press the function selection key or the machine on/off
key to cancel the function. The programme follow-up light will remain on until the function is canceled or the
step is complete. If the function is not cancelled, it will be active in the subsequent washing cycles as well.
• Child lock
Use Child Lock function to prevent children from tampering with the machine. Thus you can avoid any changes
in a running programme.
C
You can switch on and off the machine with On / Off button when the Child Lock is active. When you switch on the machine
again, programme will resume from where it has stopped.
When the Child Lock is enabled, an audio warning will be given if the buttons are pressed. Audio warning will be canceled if
the buttons are pressed five times consecutively.
To activate the Child Lock:
Press and hold Auxiliary Function button 3
for 3 seconds. After the countdown as
“3-2-1"
on the
display is over, child lock symbol appears on the display. When this warning is displayed, you can release the
Auxiliary Function button 3
.
To deactivate the Child Lock:
Press and hold Auxiliary Function button 3
for 3 seconds. After the countdown as
“3-2-1"
on the display
is over, child lock symbol disappears.
4.3.9
Delay Start
Time display
Remaining time for the completion of the programme while it is running is displayed as “01:30” in hours and
minutes format.
C
Programme time may differ from the values in section "Programme and consumption table" depending on the water
pressure, water hardness and temperature, ambient temperature, amount and the type of laundry, auxiliary functions selected
and the changes at the mains voltage.
With the
Delay Start
function, the startup of the programme may be delayed up to 24 hours. After pressing
End Time
button, the programme's estimated ending time is displayed. If the
Delay Start
is set,
Delay Start
indicator is illuminated.
In order for the Delay Start function to be activated, you must press the Start/Pause button after setting the
desired delay time.
