19
When you have installed the hob, make sure that
•
The power supply cable is not accessible through cupboard doors or drawers.
•
There is adequate flow of air from outside the cabinetry to the base of the hob.
•
If the hob is installed above a drawer or cupboard space, a thermal protection
barrier is installed below the base of the hob.
•
The isolating switch is easily accessible by the customer.
Locating the fixing brackets
•
Fix the hob on the work surface by screwing the four brackets on the bottom of
hob after installation.
•
Adjust the bracket position to suit for different work surface’s thickness.
•
Ensure the hob sits flat and square to the work surface and doesn’t slide around.
•
Turn the unit over and carefully attach the foam seal to the underside edge of
the glass.
Fitting the foam seal
ECC 64
K
