Inbuilt / Freestanding Installation
Fitting between existing carbinets
The height of the dishwasher, 845 mm, has
been designed in order to allow the machine
to be fitted between existing cabinets of the
same height in modern fitted kitchens. The
feet can be adjusted so that correct height is
reached.
The laminated top of the machine does not
require any particular care since it is heatproof,
scratchproof and stainproof.
Underneath existing work top
(
When fitting beneath a work top)
In most modern fitted kitchens there is only one
single work top under which cabinets and
electrical appliances are fitted. In this case remove
the work top of the dishwasher by unscrewing the
screws under the rear edge of the top (
a
).
a
a
b
b
After removing the work top, the screws must be screwed again under the rear edge
of the top (
b
).
Attention
The height will then be reduced to 815 mm to allow the dishwasher to fit perfectly
under the kitchen working top
9
Summary of Contents for E14DWB
Page 9: ...8...
