Euromaid E14DES, Installation And Operation Manual

Page: 35 / 35

QUICK REFERENCE GUIDE EN
On / Off Button
When you press On / Off button, indicator lights illuminate on the
display for ON position. The lights turn off in OFF position.
Rinse aid level indicator light
If this indicator light comes on, you have to refill
rinse aid (If applicable).
You can also tell whether rinse aid must be
refilled by looking at the rinse aid dispenser.
When the visual fill indicator is dark, there is
enough rinse aid in the dispenser.
When the colour is light, open the dispenser and
refill rinse aid.
Programme Selection Button
Refer to "Table of Programme Data and Average Consumption
Values" to select a programme suitable for your dishes.
Select the desired programme with programme selection button.
Visual Indicator
17 9265 01 00_AC
Half Load / Tablet Detergent Button
Half Load/Tablet Detergent Button allows you to turn on and off the
Half Load and Tablet Detergent functions of your machine.
Half Load Function
If you want to run your machine without loading it completely, place
your dishes into the machine as you desire. Press the On/Off button
to turn on your machine. Press the Half Load/Tablet Detergent
button after selecting the desired program until Half Load Indicator
lights up, then press Start/Cancel button. ith the Half Load option
you can use every part of your lower and upper baskets and you
can save from both water and power.
Tablet Detergent Function
Depending on the hardness level of the tap water, the Tablet
Detergent function allows obtaining a better drying performance
from the multi-purpose detergents such as 2in1, 3in1, 4in1, 5in1,
etc., called as all-in-one detergents. Tablet Detergent Indicator
lights when the Tablet Detergent function is selected.
Rinse Agent indicators turn off when this function is activated.
Turn on your machine by pressing the On/Off button to use the
Tablet Detergent function. Press the Half Load/Tablet Detergent
button after selecting the desired program until Tablet Detergent
Indicator lights up, then press Start/Cancel button.
To use the Half Load and Tablet Detergent functions concurrently,
turn on your machine by pressing the On/Off button and then press
the Half Load/Tablet Detergent button until Half Load and Tablet
Detergent Indicators illuminate together.
! Important:
If you have used the Half Load or Tablet Detergent features during
the last program you used, Half Load or the Tablet Detergent
function will remain active in the next washing program you will
select. If you do not want to use these functions in the new program
you have selected, press the Half Load/Tablet Detergent button until
the indicator of the relevant function turns off.
Changing Warning Sound Volume
Every time you press the Half Load/Tablet Detergent button, the
warning sound level will change as - - Off, S:01 Low, S:02 Medium,
and S:03 High. Turn off your machine using the On/Off button to
save it. Factory setting of your machine is S:03.
Display
Water hardness level, Time Delay for the selected programme and
warning message are displayed.
Time Delay
Using the Delayed Start button, you may delay the starting time of
your program up to 9.5 hours with increments of 30 minutes. After
delaying the start, press Start/Cancel button. Once the delay time is
over, the selected program will start automatically.
Canceling the delay function
Keep the Start/Cancel button pressed for 3 seconds. The selected
delay period will be cancelled.
As soon as the canceling starts, the water that may be remained in
your machine will be drained for 30 seconds due to safety reasons.
Start/cancel button
When you press the Start/Cancel button, the washing program you
have selected will start.
(Start/Cancel indicator lights in Start mode, and turns off in Pause
mode)
How to cancel the washing program
Press Start / Cancel button for three seconds to cancel a program
that is already running. Release the button when symbol start
flashing in the display. For a couple of minutes the machine will
fulfill the necessary operations required for cancellation. Remaining
time indicator displays “0:00”.
! Important:
You may select and operate a new program following the program
cancellation process. There might be residues of detergent or
rinse aid left in the machine and/or on the pieces being washed
depending on the step the previous program was in at the time of
such cancellation.
How to change the washing program
Press Start/Pause/Cancel button first to switch your machine
into pause mode if you want to change your selection after you
have started the program. Then, switch to the desired program
by pressing Program Selection button. Start the new program by
pressing Start/Cancel button again.
! Important:
The new program will NOT start right from the beginning. It will start
from the stage last carried out by the previous program selection.
! Warning
Depending on the length of the terminated program detergent and
rinse aid may still be in the dispensers.