23
8.
Lay the device down on a soft steady surface
(Figure 10, pos. 4).
9.
Place the two towel rails (Figure 10, pos. 3)
on two of the three possible locations on the
main body (Figure 10, pos. 5).
10.
Screw and tighten the two towel rails (Figure
10, pos. 3) with eight small screws (Figure 10,
pos. 2) using a Phillips screwdriver (Figure 10,
pos. 1).
Figure 10
Figure 11
11.
Place the device brackets (Figure 11, pos. 3)
over the wall bracket (Figure 11, pos. 1).
12.
Slide the device (Figure 11, pos. 2) into the
openings of the wall bracket.
13.
Screw and tighten the device (Figure 12, pos.
1) with a small screw (Figure 12, pos. 3) to the
wall bracket using a Phillips screwdriver
(Figure 12, pos. 2).
Figure 12
